Skip to product information
1 of 3

Woodoc 50 - Exterior sealer marine GLOSS

Woodoc 50 - Exterior sealer marine GLOSS

A clear finish with a high build up of sealer . Ideal for boats , marine applications and also general outdoor wood where a finish with excellent UV - protection and water resistance is required. 

WHERE TO USE PRODUCT

For exterior use. Where a clear, matt finish with high film build is required. Provides UV-protection and water repellence. Do not use on hard, dense timber decks.

HOW TO PREPARE THE SURFACE General:

Wood must always be clean, dry & smooth before use of product. Never wash/wipe wood with water before use of product. New wood: Sand until smooth. Remove dust with clean, dry cloth. Then wipe with mineral turpentine. Previously varnished wood: Remove varnish by sanding/using paint stripper. Neutralise paint stripper according to manufacturer's instructions. Allow wood to dry completely. Sand until smooth. Remove dust with clean, dry cloth. Then wipe with mineral turpentine. Oiled wood: Sand until smooth. Then scrub well with Woodoc SteelWool and mineral turpentine. Clean off residue with clean, dry cloth. Allow surface to dry. Wood previously treated with Woodoc: Scrub well with Woodoc SteelWool and mineral turpentine. Clean off residue with clean, dry cloth. Allow surface to dry.

HOW TO APPLYTHE PRODUCT

Stir well before and during application. Do not shake or dilute product. Apply product with good quality brush. Apply first coat until surface remains evenly glossy for at least 10 minutes after application. Apply more product to dull/dry areas. Allow coat to dry completely. Sand lightly with Woodoc SteelWool. Remove dust with clean, dry cloth. Then wipe with mineral turpentine. Apply two more coats in the same way. Do not sand after third coat. Always apply a minimum of three coats. Proper film build on the surface is essential. Seal end grain very well.

COVERAGE

± 3,3 m² per litre (for three coats)

View full details