A deep polished look for beautiful floors. It has a flexible but hard wearing surface.
WHERE TO USE PRODUCT
For indoor use only. Where a clear, durable, matt finish on wooden floors is required. Fills grain of wood. Woodoc 25 is not an industrial product. Water, alcohol, heat and scratch resistant.
HOW TO PREPARE THE SURFACE
General: Wood must always be clean, dry & smooth before use of product. Never wash/wipe wood with water before use of product. New wood: Sand until smooth. Remove dust with vacuum cleaner. Then wipe with mineral turpentine. Previously varnished wood: Remove varnish by sanding/ using paint stripper. Neutralise paint stripper according to manufacturer's instructions. Allow wood to dry completely. Sand until smooth. Remove dust with vacuum cleaner. Then wipe with mineral turpentine. Oiled wood: Sand until smooth. Then scrub well with Woodoc SteelWool and mineral turpentine. Clean off residue with clean, dry cloth. Allow surface to dry. Wood previously treated with Woodoc: Scrub well with Woodoc SteelWool and mineral turpentine. Clean off residue with clean, dry cloth. Allow surface to dry.
HOW TO APPLYTHE PRODUCT
Stir well before and during application. Do not shake or dilute product. Apply product with good quality brush. Apply first coat until surface remains evenly glossy for at least 10 minutes after application. Apply more product to dull/dry areas. Allow coat to dry completely. Sand lightly with Woodoc SteelWool. Remove dust with vacuum cleaner. Then wipe with mineral turpentine. Apply two more coats in the same way. Do not sand after third coat. Always apply a minimum of three coats. Wait 48 hours after third coat has dried before using floor. Warning: Floor surface can be slippery after sealing with this product.
± 3,3 m² per litre (for three coats)